Racers Fans Rules Results Sponsors Contacts

Facebook LinkTwitter Page

Vehicles


Eligible machines are single engine power tools with limited motor and gearing modifications. Power sources must be stock 110V provided for the tool. See rules for additional information.

The Track


The Track

The drag strip is 75' of reasonably flat plywood track. There will be another 20' or so to slow down with added semisoft material (typically hay bales) to help with the deceleration of the faster entries. Racers will run on parallel wood tracks 1' wide with 2" X 4" rails on either side. We will make every effort to maintain the straightness and accuracy of this track, but expect some variation and bumps at the joints.



Prizes


Special thanks to event sponsors Bosch Tools & Ohio Power Tool for providing thousands of dollars worth of prizes. EACH EVENT = 1st Place = Bosch CLPK233-181L ($399 Retail Value) & PB360S ($199 Retail Value), 2nd Place = Bosch IDH182-02 ($279 Retail Value) & Crowd Favorite Design = Bosch IDH182-02 ($279 Retail Value). Prizes will be onsite and awarded to the winners of the race that day! It's our feeling there are few things sweeter than Power Tools won by racing other power tools.

Race Days


Cincinnati


This is the 2nd Tool Race to be held in Cincinnati and the 2nd Cincinnati Mini Maker Faire.

When: September 13-14th@ 11am - 6pm

Where: Cincinnati Museum Center

Race Times: Official races start at 2pm

Register a Racer: FREE

Louisville


This is the 2nd Tool Race to be held in Louisville and also the 2nd Louisville Mini Maker Faire.

When: September 22th@ 10am - 10pm

Where: 800 Block of Market Street

Race Times: Official races start at 2pm

Register a Racer: FREE



Columbus


This is the 6th Tool Race to be held in Columbus and the 3nd time as part of the Columbus Mini Maker Faire.

When: October 11th@ 12pm - 6pm

Where: COSI (Center of Science & Industry), 333 West Broad St.

Race Times: Official races start at 2pm

Register a Racer: FREE


Free Admission


All 3 Mini Maker Faires are free to attend and support the Tool Races. There is only a $25 entry fee if you wish to enter a vehicle in the race.

Rules


Machines are to be based on handheld power tools. A handheld power tool is a machine intended for handheld operation by one individual. A machine primarily used on a stationary mount, or rolled on wheels, or used by a group of people is not a hand tool for the purposes of this event. This event is limited to hand tools powered by standard 20 amp 120 AC electric power cords. Examples of hand tools are machines like belt sanders, angle grinders, circular saws, drills, chainsaws, weed wackers, vibrators, etc. Examples of things that are NOT hand tools are things like lawnmowers, floor sanders, generators, bench grinders, etc. No vehicles built from RC cars allowed, because they are boring.

AC electrical cords will be 100' long per lane, originating at the starting line. They will have standard Edison 3-prong connectors. You will be responsible for "coiling" the cord on the ground or laying it alongside the track for your run. No spools or cord guides allowed, but duct tape will be provided so you can tape the connector together. Tangles or poor cord feed is your responsibility.

Eligible machines are single engine power tools with no motor modifications or non-standard power sources (i.e. engine and power source needs to be box stock). Propulsion can be direct drive to track via the original blades, belts, etc, or via a custom gear/chain/tire configurations. Frames, wheels, guide rails, etc can be added as desired. Any motor or power type is allowed. But all "motors" must have originated in a hand power tool and be in their original form, with original power source driving it.

Due to the nature of the event these machines can be very fast and very dangerous. ALL entries for any class MUST REGISTER their machine and be inspected prior to racing to make sure they will stay on the track and out of the audience. We also reserve the right to say "no, unsafe" at any time for whatever reason(s) we find relevant.

Past Winners


Previous Winners

2011

CHAMPION:
Jim B - The Silver Streak

MOST CREATIVE:
Levi & Dylan – The Scorpion

BEST WRECK:
Jay – The Reaver


2010

CHAMPION:
TJ – Power Rod (AKA The Pig)

MOST CREATIVE:
Robert – United We Sand

BEST WRECK:
Jay – The Reaver


2009

CHAMPION:
TJ – Power Rod (AKA The Pig)


MORE PHOTOS

2010 Facebook Pictures

2009 Anthony Snyder

2009 Johnny Roller

2009 TJ

MORE VIDEOS

2009 Channel 10 News

2009 Johnny Roller


The Sponsors


2013 Event Sponsor 2013 Event Sponsor 2013 Event Sponsor 2013 Event Sponsor 2013 Event Sponsor

Contacts


Questions about the race, rules, qualifications, sponsorships, etc. please email:
ToolRaces@columbusideafoundry.com


Questions about the Columbus Idea Foundry, please visit:
www.columbusideafoundry.com


Questions about the Cincinnati Maker Space – HIVE13, please visit:
www.hive13.org


Questions about the Louisville Maker Space – LVL1, please visit:
www.LVL1.org